How To Snowboard Tips : How to Gear up Up Your Snowboard Bindings with Danny Kass

If yous want to set up your snowboard bindings correctly, your stance on a snowboard should be about shoulder width, with approximately 15 degrees of angle on your front binding and around 0 degrees in the back. Experiment and find what'southward most comfortable for you, in the end it's individual preference.

What Bindings to Use

The majority of bindings and boards have standardized mounting systems, and almost all bindings are are compatible. However, there are mounting variations most unremarkably found on Burton boards known as ICS, or The Channel System, as well as their proprietary 3-hole mounting blueprint. That being said, the vast majority of major binding manufacturers provide disks that allow mounting to any type of mounting system out at that place. If ever unsure, consult a local shop, or contact the binding manufacturer to see if they can send you lot the right disks to utilise, or guide yous through the process.

What You'll Need to Mount Your Snowboard Bindings

  • #3 Phillips Screwdriver
  • Measuring Record (optional)
  • Instructions that came with your bindings (besides optional, just helpful)

How to Mount Snowboard Bindings Steps

  1. Cull a pair of bindings that fit your pes size and riding way.
    • All binding companies will have size charts available to make sure yous can get dialed in correctly.
  2. Brand certain your right binding is in the front of the board, and the left bounden is in the back.
  3. Determine your stance width.
    • Information technology should exist comfortable and by and large a bit wider than your shoulders.
    • Yous can also utilise the distance from your kneecap to your heel for a standard stance width.
    • If you're unsure of where to start, try the board's reference opinion first.
    • The reference stance is a suggested spot to mountain your bindings that come marked on well-nigh snowboards.
  4. Find your hardware packet which volition contain your mounting disks, screws, and washers.
  5. Place your disks in the bindings and brainstorm to dial in your angles.
  6. Rotate the disks and so that the reference arrows on the exterior of the binding band line upwardly with the desired degrees references on the mounting disk.
  7. To commencement, we advise mounting your front binding with fifteen degrees of positive angle.
    • This is a basic starting betoken, and it helps open your hips for initiating turns.
  8. Mountain your back binding at 0 degrees.
  9. To keep your bindings in place while yous mountain them, put 1 screw and washer in opposite corners of the disk mounting holes and tighten about a quarter of the mode
  10. This will ensure your bounden stays centered over the holes while you add the final ii screws and washers
  11. Manus tighten all bolts with a #3 Phillips screwdriver until you feel a stiff resistance.
    • We don't advise using a power drill, since it tin potentially over tighten your bolts and damage the base of your snowboard.
  12. If you lot want to ride park, make certain you center the stance on the board and add a flake of negative bending on the back bounden.
    • This creates a favorable stance for riding switch, known equally a "duck" stance.
  13. Every bit you progress, yous can first to experiment with dissimilar mounting preferences
    • Set your entire stance back from centered position to create a longer olfactory organ and give more bladder for powder days.
    • As you progress, experiment with your stance and find whats comfortablemore bending, less angle, wider, narrower, etc.
    • Each adjustment yous make is designed to fit your riding way to the lath and to the weather.

More than How-To Snowboarding Videos and Information

You can get a copy of the entire 20 Tricks "FunDuhMentals" instruction video series in the iTunes shop past clicking the link below. This iii-role series covers lath setup, what to know earlier you drop, and the peak 12 basic tricks that volition help progress your riding. Learn all the snowboarding nuts from some of the biggest pros including Danny Kass, Jack Mitrani, Kevin Pearce, Pat Moore, Dan Brisse, and Louif Paradis.

Get TransWorld SNOWboarding's instructional video "twenty Tricks: FunDuhMentals" HERE

how to snowboard tips, how to set up your bindings with danny kass

How to set your bindings with Danny Kass. Photo: Chris Wellhausen